One of the most basic parts of a Bicycle Chain is composed, it is possible to convey to you the leg strength to generate forward momentum on wheels, however, it is usually exposed by the ravages of nature, harsh environment, so more needs to be regular care .
Before the use of waste oil on the chain thoroughly clean cloth
How to choose
a chain oil?
How to choose what kind of oil? This depends
on your riding environment, it can not be generalized. Such as wet or dry
conditions in addition to considerations of moisture, dust and sand will impact.
For this reason, we recommend cleaning after each chain, they need to choose for
the riding environment you need to add the chain oil.
What chain oil
suitable own chain?
Choose a large extent on the chain of oil
depends on personal preference, of course, there is a need to pay attention, do
not use something like WD 40 lubricant such as chain oil, because it will
increase in the joints inside the original grease away.
The best selection and
the frequency of oil lubricants, depending on use environment. There is a rule
of thumb: the larger when using a higher viscosity oil in the wet water because
the high viscosity of the chain more easily adhere to the surface to form a
protective film. Necessary to use a lower viscosity oil in a dry, dusty
environment, so as not easily stained dust and dirt.
How to
properly clean the chain?
Step one:
Clean
Before adding chain oil you need to clean the
dirt on the chain, the use of waste of cloth to thoroughly clean the chain
surface, each of the joints, tension gears and flywheel. Note: Do not use any
acid and alkali degreasing or detergent, as these detergents will be washed away
grease inside the joint, we also have doubts whether you should get a
professional cleaning chain EQUIPMENT for cleaning, then I think that it is not
necessary.
Error Add a location: the top of the chain, in fact, to add on the side in contact with the gear
Each drop of joints, and let it penetrate
Step two: the chain
oil
Now cleaning the transmission, you need to
give it to re-oiled. Important: Do not add oil to the chain over the chain,
because that place is not the primary contact with the flywheel.
Wait five minutes and then use a clean cloth to clean the chain
Step three: erase
excess grease
The better the oil is actually a
misunderstanding, because too much oil readily adsorb more dust and dirt to
increase the chain wear. Therefore, wait 5 minutes after oiling it fully
penetrate into the inside, then turn the transmission several times, then use a
dry cloth to wipe off the excess oil.
Most bicycle tires, many motorcycle tires, and many tires for large vehicles such as buses, heavy trucks, and tractors are designed for use with inner tubes. Inner tubes are torus-shaped balloons made from an impermeable material, such as soft, elastic synthetic rubber, to prevent air leakage. The inner tubes are inserted into the tire and inflated to retain air pressure.
Large inner tubes, which are large inflatable toruses, can be re-used for other purposes, such as swimming and rafting (see swim ring), tubing (recreation), sledding, and skitching. Purpose-built inflatable toruses are also manufactured for these uses, offering choice of colors, fabric covering, handles, decks, and Other Accessories, and eliminating the protruding valve stem.
Bicycle Inner Tube, Bike Inner Tube, Black Inner Tube
HangZhou OEM Bicycle Industrial Co., Ltd , http://www.oembicycle.com